A horn that no longer functions can potentially become dangerous and must be fixed as soon as possible. You need always, on your Dodge Caliber, be able to report your presence thanks to this vital device. It may well simply be damaged and have a strange sound on your Dodge Caliber, but nevertheless it is a problem that you must stop. The objective of this article is to go along with you step by step in this process because you will realise that you can do it yourself without going to the garage for your Dodge Caliber.
First, start by analysing where the failure came from. Based on this you will understand what repairs to do.
We will guide you step by step through the different tests:

horn-no-works-dodge-caliber

Try honking the horn with the cover open. If you hear a sound, but much weaker than usual, it suggests that that some tubes are damaged but some still work. in fact, on your Dodge Caliber there are several trumpets that carry sound.
Step two, try to locate the horn. You will find it nearby the radiator at the front of your car, near the grille. The grille is the small grille at the front of vehicles that enables air to enter while protecting the parts of your Dodge Caliber.

Horn cables unplugged on my Dodge Caliber

Once the horn is identified, we will try to disconnect and reconnect the connecting wires in order to perform a new test. To do this, take the two connected wires, pull them out by their ends towards you. There should also be a horn fixing bolt that you must unscrew. Then tidy it all up with a brush or something, then reconnect it all. Try honking your horn again. Does it work?
You have found the solution for your Dodge Caliber! If nothing changes, let’s go a little further in the tests and explanations.
You are faced with several solutions at this stage.

Faulty horn horn on my Dodge Caliber

You may well buy another tube to change the defective ones if you have been able to identify them on your Dodge Caliber thanks to the noise.

Fuse blown

you might want to also check the fuses. To find this fuse box, we invite you to visit our previous article on the subject:
“Where to find the fuse box on a Dodge Caliber”
You should also look in your vehicle owner’s manual for the fuse references of the horn fuse that you must identify precisely.
Once the fuse is identified, you can dispose of it using a pair of pliers. To verify if it is burned, have a look at the metal part. If this one is blown, your fuse has blown on your Dodge Caliber. It must as a consequence be replaced. If it looks new, it should not be questioned.
You can come across this fuse in any car shop or garage. Test the horn again after the fuse has been exchanged. Is your horn working again? Congratulations! If this still doesn’t work for your Dodge Caliber, check your dashboard and specifically your airbag indicator light. If this one is on, there may be a link. Actually, it can have an influence on the rotating switch, a part that acts as a relay between the steering wheel and the horn. Having said that, for an airbag indicator problem on your Dodge Caliber, it is recommended to go to a professional as it is more challenging to manage alone.

Conclusion

Here are the different causes that could have an impact on your Dodge Caliber’s horn. Trumpets, fuses, rotating switch, airbag. Precisely determining the fault will help you to remedy it. Be careful to replace the fuse with an identical fuse of the same intensity.

To get more tips on the Dodge Caliber, take a look at the Dodge Caliber category.