If the oil light on your Chevrolet Cruze turns on, you should be concerned. It suggests a potential failure that could damage your Chevrolet Cruze or even put you in danger so be vigilant and very responsive.
In this article, we wish to try to provide you with an answer so that you can know the ins and outs of this sight and thus correct the situation.
What does the oil sight glass look like on your Chevrolet Cruze?
To begin with, it is important to identify this indicator on your Chevrolet Cruze. It is red in colour and represents a small burette with a drop on the right. Like all red lights, this means that you must stop your Chevrolet Cruze as soon as possible. To check it works, you will see it turn on when you turn the ignition. If it does not light up, your indicator light is flawed.
Do not mix up this light with the almost identical yellow one. This one signifies that you are probably short of oil.
What is the purpose of the oil indicator light that lights up on your Chevrolet Cruze?
Now, we will explain to you what it is for and why it is essential. As opposed to what we may think, it has nothing to do with the oil level in your Chevrolet Cruze. What is more, it is there to report a loss of pressure in this engine oil, which can quickly damage or even destroy your Chevrolet Cruze’s engine. That’s why as soon as it appears on your vehicle, you must stop the car.
then, we will explain to you what this oil is intended for in your Chevrolet Cruze’s engine. It works with a set of metal parts, which are frequently in contact and therefore wear out. The oil under pressure consequently ensures the lubrication of these parts to avoid them from being damaged. Otherwise, it also serves to cool them down since they heat up quickly when you drive your Chevrolet Cruze. At last, the oil also takes away and circulates dirt that could affect your engine.
You must consequently ensure that the engine oil pressure is always conserved at its recommended level for your Chevrolet Cruze. This represents 1 bar at standstill and about 5 bars at high speed. In a logical way, when the pressure does not reach 1 bar, a sensor should signal it by lighting the warning light that should alert you.
Faults that trigger the ignition of the oil sight glass on your Chevrolet Cruze:
Three factors could lead to the ignition of this light. First, the most likely, if the oil pump is faulty. It no longer fulfils its function of keeping up oil pressure in the engine. If this is the case, we urge that you go to a garage because only a professional can make an appropriate diagnosis on your Chevrolet Cruze.
Secondly, if you run out of oil, the pressure could drop. Same impact with low pressure, the red LED lights up. So what you have to do is put more oil. The last, rarer case is a defective pressure sensor that can no longer detect the pressure correctly and therefore sends incorrect information. In this case, it is also necessary to call upon a professional for your Chevrolet Cruze as he will have the pressure control equipment and will be qualified to tell you exactly what it is.
So now you know what this light is for and what the related failures are on your Chevrolet Cruze. Once again, be extremely vigilant when a red light turns on as they stand for a real immediate danger to your Chevrolet Cruze and especially to passengers.
To discover more tips on the Chevrolet Cruze, take a look at the Chevrolet Cruze category.