If the oil light on your Chevrolet Silverado turns on, it is best to be concerned. It suggests a potential failure that could ruin your Chevrolet Silverado or even put you in danger so be vigilant and very reactive.
In this article, we want to try to provide you with an answer so that you can understand the ins and outs of this sight and thus correct the situation.Oil-indicator-lights-up-chevrolet-silverado

What does the oil sight glass look like on your Chevrolet Silverado?

First of all, it is important to identify this indicator on your Chevrolet Silverado. It is red in colour and shows a small burette with a drop on the right. Like all red lights, this means that you must stop your Chevrolet Silverado as soon as possible. To ensure it works, you will see it turn on when you turn the ignition. If it does not light up, your indicator light is flawed.
Do not mix up this light with the nearly identical yellow one. This one signifies that you are almost certainly short of oil.

What is the purpose of the oil indicator light that lights up on your Chevrolet Silverado?

Now, we want to explain to you what it is for and why it is vital. Contrary to what we may think, it has nothing to do with the oil level in your Chevrolet Silverado. What is more, it is there to report a loss of pressure in this engine oil, which can quickly damage or even ruin your Chevrolet Silverado’s engine. That’s why as soon as it appears on your vehicle, you must stop the car.
then, we will make clear to you what this oil is used for in your Chevrolet Silverado’s engine. It works with a set of metal parts, which are frequently in contact and therefore wear out. The oil under pressure therefore ensures the lubrication of these parts to stop them from being damaged. Otherwise, it also serves to cool them down because they heat up quickly when you drive your Chevrolet Silverado. At last, the oil also takes away and circulates dirt that may well damage your engine.
You must therefore ensure that the engine oil pressure is always conserved at its recommended level for your Chevrolet Silverado. This represents 1 bar at standstill and about 5 bars at high speed. In a logical way, when the pressure does not reach 1 bar, a sensor should indicate it by lighting the warning light that should alert you.

Faults that trigger the ignition of the oil sight glass on your Chevrolet Silverado:

Three factors could lead to the ignition of this light. First, the most likely, if the oil pump is malfunctioning. It no longer fulfils its function of maintaining oil pressure in the engine. If this is the case, we would suggest that you go to a garage because only a professional can make an accurate diagnosis on your Chevrolet Silverado.
Secondly, if you run out of oil, the pressure could drop. Same consequence with low pressure, the red LED lights up. So what you have to do is add more oil. The last, rarer case is a flawed pressure sensor that can no more detect the pressure correctly and therefore delivers incorrect information. In this case, it is also imperative to call upon a professional for your Chevrolet Silverado as he will have the pressure control device and will be qualified to tell you exactly what it is.

Conclusion :

So now you know what this light is for and what the related failures are on your Chevrolet Silverado. Once again, be extremely careful when a red light comes on as they stand for a real immediate danger to your Chevrolet Silverado and especially to passengers.

If perhaps you have any additional questions about the Chevrolet Silverado, do not hesitate to consult our Chevrolet Silverado category.