If the oil light on your Dodge Avenger lights up, it is best to be concerned. It means a potential failure that could affect your Dodge Avenger or even put you in danger so be vigilant and very responsive.
In this article, we wish to try to provide you with an answer so that you can know the ins and outs of this sight and thus correct the situation.Oil-indicator-lights-up-dodge-avenger

What does the oil sight glass look like on your Dodge Avenger?

First of all, it is important to identify this indicator on your Dodge Avenger. It is red in colour and shows a small burette with a drop on the right. Like all red lights, this means that you must stop your Dodge Avenger as soon as possible. To make sure it works, you will see it turn on when you turn the ignition. If it does not light up, your indicator light is broken.
Do not mix up this light with the nearly identical yellow one. This one implies that you are probably short of oil.

What is the purpose of the oil indicator light that lights up on your Dodge Avenger?

Now, let us explain to you what it is for and why it is very important. Unlike what we may think, it has nothing to do with the oil level in your Dodge Avenger. In addition, it is there to report a loss of pressure in this engine oil, which can quickly damage or even ruin your Dodge Avenger’s engine. That’s why as soon as it appears on your vehicle, you must stop the car.
then, we will explain to you what this oil is intended for in your Dodge Avenger’s engine. It works with a set of metal parts, which are frequently in contact and therefore need replacing. The oil under pressure consequently ensures the lubrication of these parts to avoid them from being damaged. Otherwise, it also serves to cool them down due to the fact that they heat up quickly when you drive your Dodge Avenger. Finally, the oil also cleans and circulates dirt that could damage your engine.
You must consequently ensure that the engine oil pressure is always maintained at its recommended level for your Dodge Avenger. This represents 1 bar at standstill and about 5 bars at high speed. Logically, when the pressure does not reach 1 bar, a sensor should indicate it by lighting the warning light that should alert you.

Faults that trigger the ignition of the oil sight glass on your Dodge Avenger:

Three factors could result in the ignition of this light. First, the most likely, if the oil pump is defective. It no longer fulfils its function of keeping up oil pressure in the engine. If this is the case, we would suggest that you go to a garage because only a professional can make an accurate diagnosis on your Dodge Avenger.
Secondly, if you run out of oil, the pressure could drop. Same consequence with low pressure, the red LED lights up. So what you have to do is put more oil. The last, rarer case is a damaged pressure sensor that can no more detect the pressure properly and therefore delivers incorrect information. In this case, it is also necessary to call upon a professional for your Dodge Avenger as he will have the pressure control equipment and will be qualified to tell you exactly what it is.

Conclusion :

So now you know what this light is for and what the related failures are on your Dodge Avenger. Once again, be extremely cautious when a red light turns on as they stand for a real immediate danger to your Dodge Avenger and especially to passengers.

To get more tips on the Dodge Avenger, take a look at the Dodge Avenger category.