For the first time when you started this morning you experienced that the steering wheel of your Audi Q5 had started squeaking strangely for no reason? It is very likely that a small maintenance action is requested or a minor repair if one of the parts is damaged. Here are some answers in this article that will help you see more obviously and detect the cause that provokes some noise on your Audi Q5 before you go to the garage. You might also wonder if that’s dangerous, at first sight it’s not, but you should still be careful regarding cars malfunctions as they can become more important even though it’s nothing at the beginning.

steering-wheel-squeaks-audi-q5

Causes of a creaking steering wheel on a Audi Q5:

First of all, it is crucial to know that the squeaks or other noises of your Audi Q5 are closely related to the weather conditions and therefore take on a arbitrary character which makes the diagnosis more difficult.
Here are some inexpensive tips to try to repair the failure of a squeaking steering wheel.
Everything is generally figured out by the direction of your car.
If your Audi Q5 is not or poorly looked after, try greasing different parts.
We will explain it to you step by step.

Parts to be greased on your Audi Q5:

Your steering wheel is associated to the steering column, which consequently is connected to the steering rack. Its objective is to send the rotational movement employed by the driver to the rack that will make it possible for the steering bars to be activated in right or left translation for steering the wheels of your Audi Q5.
On this steering column is a preventive joint, called the deck joint.
Try to apply a little suitable grease, or WD 40, it can eliminate squeaking.
Otherwise, try greasing the rack.
It is the central part of the management. As described above, it is responsible for making the link between the steering column and the wheels on your Audi Q5.

It is therefore by far the most largely used mechanism for steering your Audi Q5. Very simple in design and with few joints, it avoids the risk of play and frequent adjustments.
Indeed, the rubber bellows, placed at its ends, age over time and eventually burst. Dust and abrasive particles can then go into the mechanism, while the oil escapes, resulting in premature wear.
Following a major accident, it is also advisable to check the rack rod itself.
Try to make use of silicone spray, or a non-aggressive plastic-type anti-seize agent. This will help to stop noises from your steering wheel.

If you still do not detect any improvement and your steering wheel is still squeaking, try looking at your gimbal gaiters. This small rubber bellows helps to protect the universal joint (or constant velocity joint) of your Audi Q5. It thus avoids the entry of undesirable dust that would quickly overcome the joint of your Audi Q5.
Another crucial function of the bellows is that its full of the grease in which the cardan shaft is immersed. Without this grease, the service life of the cardan shaft is very short, caused by the intense friction between the metal parts that make it up
It is found in the center of your wheel, on the inside. So check their condition to make sure it doesn’t come from there. A little grease should do the trick too and stop strange noises.

Power steering fluid level on your Audi Q5:

If you still don’t have any progression, or if you know it doesn’t come from there, make sure you always have power steering fluid. Your Audi Q5 has them when the steering is hydraulic or electro-hydraulic power steering. If the power supply is electric, you do not have steering fluid.

Conclusion for a creaking steering wheel on a Audi Q5:

So here are the main causes of steering wheel squeaking, very often your parts most certainly need a little grease. Make sure your Audi Q5 is regularly maintained to avoid any delays. If, in spite of all these checks, nothing has improved, then go to your mechanic, maybe the problem is a little more serious.

If you wish more guides on the Audi Q5, go to our Audi Q5 category.