Having a working windshield washer is one of the things you shouldn’t do without. First of all, we think of driving ease, but it is important to know that this also signifies your safety at the wheel because of the importance of field of vision when driving your Chevrolet Cruze.
In this article we will explain step by step how to identify the fault and solve it in order to have an effective windscreen washer.
Identify the failure of the windscreen washer of your Chevrolet Cruze:
First thing to watch out for before handling, have you filled up your cleaning fluid? If so, let’s see what causes prevent your equipment from functioning properly.
Causes for wipers that no longer work on your Chevrolet Cruze
Very often, your equipment is blocked by accumulated dirt or limescale. This is the main factor that will prevent your equipment from working. To remedy this, try to unclog your sprinklers. These holes make it possible for the product to be propelled onto your Chevrolet Cruze’s windshield. It is very likely that they are clogged, by accumulation of limestone, or various types of dirt. To do this, you can start by trying to blow, yourself or with some powerful equipment, such as a bicycle pump or preferably the tire inflator at your gas station.
How to fix wipers that no longer work
If nothing can be done, try to get yourself a thin, durable thing, such as a paper clip, that will enable you to gain access to the interior without losing a piece. We suggest that you also employ a mixture of vinegar and hot water to optimize your results.
Repeat the test, if it still doesn’t work, maybe it’s blocked at a deeper place, at the connection pipe. This is the link between the pump and the nozzle in your Chevrolet Cruze.
To reach it, you will have to open your cover:
You should find the two hoses specific to each nozzle. Try to tidy them and of course make sure they are properly connected. Use the same cleaning procedures explained above. When they are cleaned, you should be able to circulate water through them without any problems. Then plug them back in correctly, and repeat the test on your Chevrolet Cruze. If it still doesn’t work, you now understand that it doesn’t come from the sprinklers or the pipes.
From there, you should consequently check the pump. It is the one who starts the product launch.
You will find it near the cleaning fluid reservoir under your Chevrolet Cruze’s hood.
First test to see if it works, when you turn on the washer, you are expected to hear a noise when the pump is activated. In the absence of noise, this denotes that it does not work. It will then have to be replaced.
It is a very basic thing to do . First, do away with the two screws that enable it to be fixed on your Chevrolet Cruze.
Then, you must find two power wires. They are mainly black and red. They have to be disconnected, but watch out, they must be reconnected in the right direction soon after, or you could create a short circuit on your Chevrolet Cruze. A little tip to bear in mind: the red wire symbolizes the + terminal. For example, place a piece of red tape on it to make sure you can find it. Do the same with the black tape on the bollard – . Thanks to this, you will be able to reconnect the wire of the right color without any problem later on.
Once completed, you can remove the old pump and place the new pump on your Chevrolet Cruze. Reconnect the cables properly using the tip, then just screw the two retaining screws back on.
Now run a test again.
Everything should be back to normal by now.
If you want more guides on the Chevrolet Cruze, go to our Chevrolet Cruze category.